Manner produce a wide range of products, including rotating torque transducers, all of which relate closely to the subject of non-contact measuring signal transmission, non-contact data and energy transmission. Used mainly in mechanical engineerin...

The special flange design of torque sensor 4504 makes it very suitable for many test rig applications. Test bed for engines, dynamometer, wheel load simulation, gear boxes pumps and many others. The torque sensor rotor is fixed to the input shaft ...

For joining and press-fit applications,Electromechanical NC joining systems are increasingly supplanting the familiar
hydraulic, pneumohydraulic or pneumatic joining modules and actuator. In addition to less environmental impact, a more favor...

maXYmo BL, the latest XY monitor from Kistler, monitors and evaluates XY curves of two measurands that have to stand in a certain relation to each other.Such curves arise in applications such as Press fitting ball bearings, Pivoting and adjusting ...

The Kistler Staiger Mohilo DMF/P A300 single-channel force/displacement measuring system is specifically designed for the monitoring of interference press fits. Press force and stroke distance are measured simultaneously and the force v distance g...

The Kistler Staiger Mohilo DMF/P A400 interfaces multiple load cells and displacement transducers to obtain both force and displacement during the press stroke operation of multiple stations. The force vs. displacement graphs are analysed and test...

For joining operations up to 1 kN, fitted with integrated Piezo Force sensor for increased accuracy at even lower capacity the Kistler NCF-T is the ideal Servo Press System. The Kistler NCF-T Features repeatability of 5 micron, has overload capaci...

For Joining operations of up to 60 kN, fitted with integrated Piezo Force sensor the Kistler NCF-H is the ideal Servo Press System. The unique design of the hollow shaft motor offers a very compact design yet still with a press stroke of 200 mm fo...

For Joining operations of up to 35 kN, where space is limited, the Kistler NCF-S is the ideal Servo Press System. Its unique V-shaped design with drive motor on the side allows a pitch between Servo Press station as little as 70 mm. Fitted with du...

For Joining operations of up to 50 kN, where requirements are less demanding, the budget model Kistler NCF-B is the ideal Servo Press System. With integrated piezoelectric force sensor and two predefined measuring ranges of 25 and 50 kN The Kistle...

For Joining operations of up to 300 kN, the Kistler NCF-N is the ideal Servo Press System. With integrated piezoelectric force sensor and two measuring ranges the same Servo Press can be used for very high force applications and low force applicat...